Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20
Page 21
Page 22
Page 23
Page 24
Page 25
Page 26
Page 27
Page 28
Page 29
Page 30
Page 31
Page 32
Page 33
Page 34
Page 35
Page 36
Page 37
Page 38
24 I WWW.CONCO.NET Built ProSeries tough the Excaliber Flex Drive Tube Cleaning System incorporates rotary tube cleaning action with a water flush to remove tough deposits in condenser and heat exchanger tubes from 10 to 38 mm 38 to 112 O.D. No electricity is required. This powerful unit uses only plant air and water to operate and is safe to use in any location. Shaft rotation and water flow are controlled by a simple foot pedal. The system is very easy to use and only minimum training is required. At the heart of the Excaliber is a robust 3.9 kW 5.25 HP air powered motor that drives a flexible shaft at speeds up to 2500 RPM. Armed with the proper brush the unit will scour off deposits and flush tubes clean in a single efficient operation. Excaliber can be configured to tackle almost any job. With a wide range of brushes for soft and hard deposits the Excaliber is an extremely versatile tube cleaning system. The Excaliber is ideal for cleaning n Lube Oil Coolers n Excitor Coolers n Hydrogen Coolers n Seal Oil Coolers n Stator Coolers TUBE CLEANING SYSTEM This state-of-the-art rotary technology scours tubes clean even in tight and limited access locations. How ItWorks The Excaliber Flex Shaft Tube Cleaner uses a brush mounted to the tip of a flexible shaft rotating at up to 2500 RPM and a water flush to remove debris. As the flexible shaft rotates the unit pumps water through the shaft casing to the cleaning tool flushing away deposits as they are loosened. Features n Air Powered no electricity required n Stainless steel and aluminum construction n Adjustable speed and torque control n Flexible shafts up to 18 m 60 long n Interchangeable brushes n Air and water hose available in 7.5 and 15 m 25 and 50 lengths n Foot pedal activation Soft Deposits Scale and Corrosion Flexible Shaft Shaft CoreWater Flush Air Powered for Safety Specifications Motor Power 3.9 kW 5.25 HP Air Requirements Minimum 4.1 BAR at 144 CMH 60 PSI at 85 CFM Maximum 6.9 BAR at 279 CMH 100 PSI at 175 CFM Water Requirements Minimum 2.1 BAR at 11.4 LPM 30 PSI at 3 GPM Recommended 3.4 BAR at 18.9 LPM 50 PSI at 5 GPM Maximum 8.6 BAR at 26.5 LPM 125 PSI at 7 GPM Flexible Shaft Speed andTorque Adjustable 300 RPM at 21 N m 185 lb in to 2500 RPM at 15 N m 132 lb in Air andWater Hoses 19 mm 34 with Chicago quick connect fittings Dimensions 25 cm 10 high x 66 cm 26 wide x 20 cm 8 deep Weight 26 kg 58 lbs net dry P2000XCAL Excaliber Pneumatic Flex Drive Tube Cleaning System including foot pedal with quick connect air fitting Call for Customization Options and Prices Note See page 25 for airwater hoses flexible shafts and brushes.