|
|
|
|
|
|
 |
Conco-j&w® Air-Cooled
Condenser Cleaning
Faster…Cleaner…Safer The Conco – j&w® System
Designed to accommodate any fin-fan, air-cooled condenser or
heat exchanger, the Conco – j&w® System has been successfully
used on fins fouled with dust, dirt, debris, pollen, leaves, insects,
and even bird and bat carcasses. The System has been used in over
50 power plants, petrochemical plants and process industry plants
in the U.S., Mexico, Europe and the Middle East. The frame and
tracks of the System are readily adjustable for virtually all sizes
and layouts of fin-fan exchangers including flat coolers, vertical
coolers, “A” frame and “V” frame configurations. Driven by a
motor and belt arrangement, the nozzle assembly moves over
the fins at a constant speed and at a fixed height. The system
is suitable for use on all materials, including steel, aluminum,
brass and copper.8
|
|
Features:
- Driven at optimum speed, the nozzles clean 325 square feet per hour
- More effective than hand water lance, foam wash or fire hose
- Fast production rates, no wait time for heat exchanger cooling
- Safe, no personnel on scaffolds or exposed to hot, humid conditions during operations
- Cleaning can be performed on-line
|
|
|
 |
|
 |
 |
BEFORE CLEANING
Tube fins are severely fouled with dust, pollen and fine particles
|
AFTER CLEANING
Dust and debris are thoroughly removed, leaving tube fins completely clean and undamaged
|
|
 |
|
Conco-j&w ® Air-Cooled
Condenser Cleaning
Operator-friendly…Durable…Efficient
Productivity by Design
Designed to accommodate any fin-fan, air-cooled condenser or heat exchanger, the Conco – j&w® System has been successfully used on fins fouled with dust, dirt, debris, pollen, leaves, insects, and even bird and bat carcasses. The System has been used in over 50 power plants, petrochemical plants and process industry plants in the U.S., Mexico, Europe and the Middle East. The frame and tracks of the System are readily adjustable for virtually all sizes and layouts of fin-fan exchangers including flat coolers, vertical coolers, “A” frame and “V” frame configurations. Driven by a motor and belt arrangement, the nozzle assembly moves over the fins at a constant speed and at a fixed height. The system is suitable for use on all materials, including steel, aluminum, brass and copper.8 |
Features:
- Few components, easily set up
- Control box located at a safe distance from the cleaning operations
- Controls are clearly marked and easily accessed by the operator
- Automatic nozzle head travel at the touch of a button
- Very little routine maintenance required
- Readily available parts can be quickly replaced as needed, on-site, to ensure optimal reliability
|
|
Complete systems are available for:
- Automatic cleaning
- Semi-Automatic cleaning
- Portable service units
System cleans thoroughly while
operators remain a safe distance
from spray area |
| |
 |
|
|
|
|
